Data Protection Commissioner

[text version]

Data security guidance

1. Introduction

2. The law

3. Data collection and retention policies

4. Access control

4.1 Access authentication

5. Automatic screen savers

6. Encryption

7. Anti-Virus Software

8. Firewalls

9. Software Patching

10. Remote Access

11. Wireless networks

12. Portable Devices

13. Logs and Audit trails

14. Back-up systems

15. Incident Response Plans

16. Disposal of Equipment

17. Physical Security

18. The Human Factor

19. Certification

1. Introduction
Data controllers in the private and public sectors hold increasing amounts of personal data on individuals. The decreasing cost of electronic storage and processing has greatly contributed to this. Organisations also increasingly outsource data processing to third parties (data processors).  Many organisations also continue to hold large quantities of personal data in manual form – often in off-site locations.  This large increase in the quantity of personal data processed and held gives rise to security challenges for the organisations that collect the data.  Data controllers need to regularly audit their holdings of personal data and the procedures they have in place to protect this data.  Questions they should ask include:

  • Do we know what types of personal data we hold
    - electronically (including less obvious data such as CCTV images)?
    -  on paper?
  • Can we justify the collection of this information?
    - Why do we collect it?
    - What it is used for?
    - How long do we hold it?
    - Who has access to it?
    - To whom do we disclose it?
    - Is it held securely?
    - How we dispose of the data?
  • If we outsource processing of personal data to a data processor (including a 'cloud computing' service provider), are we satisfied that their security procedures are adequate?

2. The law
The Data Protection Acts, 1988 and 2003 do not detail specific security measures that a data controller or data processor must have in place, though the European Communities (Electronic Communications Networks and Services) (Privacy and Communications) Regulations 2011 detail some requirements specific to the electronic communications services sector.  Instead the Data Protection Acts place an obligation on data controllers to have "appropriate security measures" in place to prevent "unauthorised access to, or unauthorised alteration, disclosure or destruction of, the data and against their accidental loss or destruction."  When determining measures that provide an "appropriate" level of security, the Acts provide that a number of factors can be taken into account:

  • "the state of technological development";
  • "the cost of implementing the measures";
  • "the harm that might result "; and
  • "the nature of the data concerned".

Data controllers and data processors are also obliged to ensure that their staff and "other persons at the place of work" are aware of security measures and comply with them.  The legal  obligation to keep personal data secure applies to every data controller and data processor, regardless of size.  While most of the guidance below applies to any such organisation, some aspects would only apply to a larger organisation using an IT network.  In this guidance note we identify certain issues that data controllers and data processors should consider when developing their security policies. 

3. Data collection and retention policies
The most effective means of mitigating the risk of lost or stolen personal data is not to hold the data in the first place.  Data retention and replication should always be assessed against business need and minimised, either by not collecting unnecessary data or by deleting data as soon as the need for it has passed.  An example is organisations manually collecting full credit card details including expiry date and CVV number and storing such information beyond the processing of the transaction.  A data controller1 should always know what data it holds, where it is held and how it flows through the organisation.  Without this oversight, effective protection of personal data within the organisation is a difficult task.

1  Data processors are subject to the same security obligations as data controllers.  Therefore references to 'data controllers' in this guidance note also cover data processors, unless the context indicates otherwise.

4. Access control
A data controller has a duty to limit access to personal data on a "need to know" basis.  Greater access limitations or controls should apply to more sensitive data.  A data controller must be aware of the different users who access their systems/records and their requirements. The different types of users could include:

- staff at various levels;
- third party contractors / data processors
- customers
- business partners

Consideration must be given to the different requirements of each of these types of user and their access privileges to personal data should fully reflect these requirements.  The nature of access allowed to an individual user should be set and reviewed on a regular basis.  Individual staff members should only have access to data which they require in order to perform their duties.  Specific procedures sometimes referred to as a "movers, leavers and joiners" policy are required in all organisations with access to personal data to increase or restrict previous access where a user role changes, prevent use of shared credentials (multiple individuals using a single username and password) and detect use of default passwords.  This must be supported by regular reviews of actual access to ensure that all authorised access to personal data is strictly necessary and justifiable for the performance of a function.

Particular attention should be paid to the deployment of IT administrator accounts with unrestricted access to personal data.  Policies should be in place in regard to vetting and oversight of the staff members allocated these accounts.  A staff member with such responsibilities should have separate user and administrator accounts.

There should be strict controls on the ability to download personal data from an organisation's systems.  Such downloading can be blocked by technical means (disabling drives etc).  Many organisations have taken a decision to block access to USB ports having examined the inherent risks involved in leaving such ports open by default for all users.

4.1 Access authentication
Users should have a unique identifier (such as a password, passphrase, smart card or other token)2  to allow access to personal data.

Passwords / Passphrases
Passwords are a word or string of characters. A strong password should include a minimum of twelve characters and contain one or more of each of the following:

- letters (upper and lower case);
- symbols (e.g. &, *, @,  €, $ etc);
- numbers ( 0 - 9 );
- punctuation (?, ", !)l

Passwords should be reasonably easy for the user to remember but very difficult for anyone else to guess.  Examples might include:

· M1_s0n, "The_Av1at0r"! (based on 'My son, "the aviator"!' with numbers replacing certain vowels)
· Te@m5Rb@dp@55word5 (based on 'Teams are bad passwords' with numbers and symbols replacing certain letters)

Please do not use these examples as actual passwords!

Passphrases are similar to passwords, but represent a sentence or sequence of words. They should include twenty characters or more and should also include symbols, numbers and punctuation marks, e.g.

· "I Love the musical, The Sound of Music2!"
· Ilike2swim@thelocalswimingpool.

Data controllers should ensure that users are made aware that their password / passphrase is unique to them and must not be disclosed to anyone else. Data controllers should enforce password complexity and length.  Shared credentials should never be permitted.  Vendor supplied defaults for system passwords and other security parameters should never be left in place.  Data controllers must ensure that partner organisations with access to their systems or data respect these controls.

Smart card / tokens
These are devices that provide authentication either by generating a code to be entered or containing a chip that authenticates with the system being accessed. The token generates a PIN number that is valid for a very short period of time. This is used in conjunction with a username and password to authenticate the user.

2   This list is not exhaustive.  For example, a biometric (e.g. a fingerprint, voice or retina scan) can also be used as a unique identifier.  However, as biometrics in themselves raise serious data protection and privacy issues (see our guidance on biometrics), their use should only be considered where other authentication methods are demonstrably insufficient.

5. Automatic screen savers
Most systems allow for screensavers to activate after a period of inactivity on a computer, requiring a password to re-establish access.  This automatic lock activation is useful as the alternative manual locking of a workstation requires positive action by the user every time he/she leaves the computer unattended.  Regardless of which method an organisation employs, computers should be locked when unattended.  This applies not just to computers in public areas, but to all computers.  It is pointless having an access control system in place if unattended computers may be accessed by any staff member.

6. Encryption
Encryption is the process of encoding information stored on a device and can add a further useful layer of security.  It is considered an essential security measure where personal data is stored on a portable device or transmitted over a public network.  As with passwords, this measure is pointless unless the key to decrypt the data is kept secure.  The key should meet the standards of complexity required for passwords under section 4.1 above3

3  In view of the rapid rate of technological development, it is not possible to be prescriptive about the standard of encryption that would ensure that data is inaccessible to unauthorised individuals.  At present, 256 bit whole disk encryption would be viewed as an acceptable standard.  We acknowledge that the market is bringing forward other options to securely encrypt data which may not require whole disk encryption and where properly applied by the user these can achieve the same security outcome.

7. Anti-virus software
Anti-virus software is not only required to prevent infection from the internet (either e-mail or web-sourced) but to prevent viruses that may also be introduced from portable devices, such as memory sticks (the use of which should be strictly limited).  No anti-virus package will prevent all infections, as they are only updated in response to infections.  It is essential that such software is updated on a regular basis and that policies support vigilance in regard to potential threats.  A policy of not opening e-mail attachments from unexpected sources can be a useful way of preventing infection.

8. Firewalls
A firewall is essential where there is any external connectivity, either to other networks or to the internet.  It is important that firewalls are properly configured, as they are a key weapon in combating unauthorised access attempts.  The importance of firewalls has increased as organisations and individuals increasingly avail of "always-on" internet connections, exposing themselves to a greater possibility of attack.

9. Software patching

Patches are the latest updates from the creator of your operating system software or application software.  They usually contain fixes to potential security concerns and can be an important tool in preventing hacking or malware attacks.  Organisations should ensure that they have regular, consistent and comprehensive patch management procedures in place.  Where possible, before installing the very latest patches, it is good practice to install these patches in a test environment to ensure that the patches do not create other issues with your systems.  A record should also be kept of the date and patch installed on a system.

10. Remote access

Where a staff member / contractor is allowed to access the network from a remote location (e.g. from home or from an off-site visit) such access creates a potential weakness in the system, not least when accessed from a wireless network (see paragraph 9 below).  For this reason the need for such access should be properly assessed and security measures reassessed before remote access is granted.  If feasible, the access should be limited to specific IP addresses.  Security should be the first consideration in granting access to partner organisations.  Technical security measures, security assessments, contractual agreements in line with the requirements of Section 2C of the Data Protection Acts and agreed standards of management of shared assets are all important aspects in managing this risk.  It is the responsibility of the data controller to ensure that, regardless of the means by which a user remotely accesses their system, the security of the system cannot be compromised.

11. Wireless networks

Access to a server by means of a wireless connection can expose a network to attack.  The physical environment in which such systems are operated may also be a factor in determining whether weaknesses in the system security exist.  As with remote access, wireless networks should be assessed on security grounds rather than solely on apparent ease of use.  Data controllers must ensure that adequate security is in place on the network through, for example, appropriate encryption measures or specification of authorised devices.

Particular vulnerabilities are associated with the use of third party unsecured WiFi networks (e.g. those provided in airports, hotels etc).  A device using such a network may be open to attacks from other machines on the network.  A good firewall should be installed on the portable device to prevent such attacks.  The device should only connect to the network when necessary.  When using unsecured WiFi to transmit personal or sensitive data, a secure web session should be in place to protect the data.

12. Portable device

Laptops, USB keys, smart phones and other forms of portable device are especially vulnerable to theft and accidental loss.  Where a data controller considers it essential to store personal data on a portable device, these devices should be encrypted.  Whole disk encryption should be used to mitigate against storage of files outside of an encrypted segment of the disk.  In the case of smart phones, a strong password should be required at start up and also after several minutes of inactivity.  When such a device is lost steps should be taken immediately to ensure that the remote memory wipe facility is activated.  Staff allocated such devices should be familiar with the relevant procedures.

13. Logs and audit trails

Access control systems and security policies are undermined if the system cannot identify abuses.  Consequently, a system should be able to identify the user name that accessed a file and the time of the access.  A log of alterations made, along with author / editor, should also be created.  Logs and audit trails can help in the effective administration of the security system and can deter staff members tempted to abuse the system.  Staff should be informed that logging is in place and that user logs are regularly reviewed.  Monitoring processes should focus not only on networks, operating systems, intruder detection systems and firewalls, but should include remote access services, web applications and databases. 

An intruder detection system (IDS) acts as an internal alarm system that monitors and reports on malicious activities on a network or system.  Such systems also aim to detect attacks that originate from within the system.  Any organisation processing large volumes of personal data should have an IDS deployed and activated.  Where alerts/events are generated by any such systems there must be a meaningful system in place to examine them in a timely fashion.  This is to assist in identifying unusual activity and take immediate corrective action if there is an ongoing breach of security.
 
14. Back-up systems

A back up system is an essential means of recovering from the loss or destruction of data. While some system should be in place, the frequency and nature of back up will depend, amongst other factors, on the type of organisation and the nature of data being processed.  The security standards for back-up data are the same as for live data.  Click here for more information on back-up data.

15. Incident response plans

Even with the best designed systems, mistakes can happen.  As part of a data security policy, an organisation should anticipate what it would do if there were a data breach so that it can be ready to respond.  Some questions you might ask yourself:
· What would your organisation do if it had a data breach incident?
· Have you a policy in place that specifies what a data breach is? (It is not just lost USB keys/disks/laptops.  It may include any loss of control over personal data entrusted to organisations, including inappropriate access to personal data on your systems or the sending of personal data to the wrong individuals).
· How would you know that your organisation had suffered a data breach?  Does the organisation's staff (at all levels) understand the implications of losing personal data?
· Has your organisation specified whom staff tell if they have lost control of personal data?
· Does your policy make clear who is responsible for dealing with an incident?
· Does your policy meet the requirements of the Data Protection Commissioner's approved Personal Data Security Breach Code of Practice?

16. Disposal of equipment

When disposing of obsolete or redundant equipment many data controllers offer the equipment for sale to staff or donate it to charities.  It is the responsibility of the data controller to ensure that all data previously stored on the devices has been removed prior to disposal.  It is not sufficient to merely format the hard drives of the devices, as data can still be retrieved.  Software is available that will overwrite the contents of the hard drive with a series of 1's and 0's to ensure that previous data can not be retrieved.  Dependant on the nature of the data stored, it is recommended that hard drives should be overwritten between three and five times.

Where the devices are not being recycled / reused the hard drives can either be physically destroyed or degaussed4.

It is important to consider the different types of equipment that may hold personal data.  Besides obvious examples, such as servers, computers and laptops, there are a number of other devices that may store personal data.  These may include smart phones, digital photocopiers, fax machines etc.  Any data stored on these devices must also be erased prior to disposal.

A method of erasing data from a magnetic storage device.

17. Physical Security

Physical security safeguards should include the following considerations:
- perimeter security (monitoring of access, office locked and alarmed when not in use);
- restrictions on access to sensitive areas within the building (such as server rooms);
- computer location (so that the screen may not be viewed by members of the public);
- storage of files (files not stored in public areas with access restricted to staff with a need to access particular files); and
- secure disposal of records (effective "wiping" of data stored electronically; secure disposal of paper records).

18. The Human Factor

No matter what technical or physical controls are placed on a system, the most important security measure is to ensure that staff are aware of their responsibilities. Passwords should not be written down and left in convenient places; passwords should not be shared amongst colleagues; unexpected e-mail attachments should not be opened unless first screened by anti-virus software.  Effective employee training about the risks of data compromise, their role in preventing it and how to respond in the event of problems can be a very effective line of defence.  Many organisations set security policies and procedures but fail to implement them consistently.  Controls focused on individual and organisational accountability and ensuring that policies are carried out are an important part of any system designed to protect personal data.  Identify essential controls first and ensure that these controls are implemented across the organisation without exception.  Once this is in place, move on to more advanced controls designed to mitigate the risks specific to the organisation and the type(s) of data processed.

Data controllers must have procedures in place to manage staff turnover, including retrieval of data storage devices and quick removal of access permissions.

19. Certification

Certification can be a useful means of demonstrating compliance with the security requirements of the Data Protection Acts, where certification indicates that data security controls have been subject to audit or review against a recognised standard by a reputable third party organisation5. In the context of Cloud computing, customers should look to see whether cloud services providers can provide a copy of this third party audit certificate. Where Cloud Service Providers offer Model Clauses, a relevant third party audit report may satisfy in lieu of an individual right to audit. Individual audits of data hosted in a multi-party, virtualised server environments may be impractical technically and in fact serve to increase risks to those physical and logical network security controls in place.  

5  Such standards would include those issued by the International Standards Organisation, the International Auditing and Assurance Standards Board and the Auditing Standards Board of the American Institute of Certified Public Accountants.






» Permanent Link